收藏本站
OPERATION
Over Current Protection
Over current protection on the SP6123 is imple-
mented through detection of an excess voltage
condition across the high side NMOS switch dur-
ing conduction. This is typically referred to as high
side R DS(ON) detection and eliminates the need of
an external sense resistor. The over current com-
parator charges an internal sampling capacitor
each time V(V CC )-V(SWN) exceeds the 200mV
(typ) internal threshold and the GH voltage is high.
The discharge/charge current ratio on the sam-
pling capacitor is about 2%. Therefore, provided
that the over current condition persists, the capaci-
lems in the external MOSFETs.
The following figure shows typical waveforms
for the output drivers.
As with all synchronous designs, care must be
taken to ensure that the MOSFETs are properly
chosen for non-overlap time, enhancement gate
drive voltage, “on” resistance R DS(ON) , reverse
transfer capacitance Crss, input voltage and
maximum output current.
tor voltage will be pumped up during each time GH
switches high. This voltage will trigger an over
current condition upon reaching a CMOS inverter
5V
GATE DRIVER TEST CONDITIONS
90 %
threshold. There are many advantages to this
approach. First, the filtering action of the gated
scheme protects against false and undesirable trig-
GH(GL)
10 %
5V
2V
FALL TIME
90 %
gering that could occur during a minor transient
overload condition or supply line noise. Further-
more, the total amount of time to trigger the fault
GL(GH)
2V
RISE TIME
10 %
depends on the on-time of the high side NMOS
switch. Fifteen, 1 μ s pulses are equivalent to thirty,
500ns pulses or one, 15 μ s pulse, however, depend-
ing on the period, each scenario takes a different
amount of total time to trigger a fault. Therefore,
the fault becomes an indicator of average power in
the high side switch. The 200mV overcurrent
threshold has a 3400 ppm/ ° C temperature coeffi-
cients in an effort to first order match the thermal
characteristics of the R DS(ON) of the high side
NMOS switch. It assumed that the SP6123 will be
used in compact designs where there is a high
amount of thermal coupling between the high side
switch and the controller.
Output Drivers
The SP6123, unlike some other bipolar control-
ler IC’s, incorporates gate drivers with rail-to-
rail swing that help prevent spurious turn on due
to capacitive coupling. The driver stage consists
V(BST)
GH
Voltage
0V
V(VCC)
GL
Voltage
0V
V(VCC=VIN)
SWN
Voltage
~0V
- V(Diode) V
~ 2*V(VIN)
BST
Voltage
NON-OVERLAP
of one high side NMOS, 4 ? driver, GH, and one
low side, 4 ? , NMOS driver, GL, optimized for
driving external power MOSFET’s in a syn-
chronous buck topology. The output drivers
also provide gate drive non-overlap mechanism
that provides a dead time between GH and GL
transitions to avoid potential shoot-through prob-
~ V(VIN)
TIME
Date: 9/13/04
SP6123 Low Voltage, Synchronous Step Down PWM Controller
8
? Copyright 2004 Sipex Corporation
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX4825ETP+T IC RELAY DRIVER 8CHAN 20-TQFN
MAX4822ETP+T IC RELAY DRIVER 8CHAN 20-TQFN
R1S8-1505/P-R CONV DC/DC 1W 15VIN 05VOUT
SP6121EB EVAL BOARD FOR SP6121
A9CCA-0408F FLEX CABLE - AFG04A/AF04/AFG04A
R1S-2409/P-R CONV DC/DC 1W 24VIN 09VOUT
SP6120EB EVAL BOARD FOR SP6120
ASPI-6045S-330M-T INDUCTOR POWER 33UH 6045 SMD
相关代理商/技术参数
SP6123EN-L 制造商:Exar Corporation 功能描述:IC BUCK CONTROLLER LOW VOLT 300KHZ
SP6125 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High-Voltage, Step Down Controller in TSOT6
SP6125EB 功能描述:电源管理IC开发工具 Eval Board for SP6125 Series RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
SP6125EK1L 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High-Voltage, Step Down Controller in TSOT6
SP6125EK1-L 功能描述:DC/DC 开关控制器 RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
SP6125EK1-L/TR 功能描述:电源管理IC开发工具 High-Voltage Step Down Controller RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
SP6125EK1L/TR1 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High-Voltage, Step Down Controller in TSOT6
SP6126 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:Evaluation Board Manual